My CUBE


Joined
2 Jun 2016
Posts
722
Reaction score
303
Location
Potchefstroom
Started fitting bulkheads to confirm sizes. Busy with overflow box design.

Ill be home in August. More updates will be loaded once I have done the bracing and hardplumbing on the closed loop.
IMG-20200706-WA0026.jpg
 
Joined
2 Jun 2016
Posts
722
Reaction score
303
Location
Potchefstroom
Quarantine Quarantine Quarantine.

Little update from side.

I flew back on Friday. Currently locked up at a hotel in East Gate.

This morning I paid for 2 x Atlantik V4's and 2 x OR2 120 Blue Sky led bars.

These will be supplemented with 2 more OR120's Blue Skyes and then 2 x DIY t5 fixtures.

So the setup would basically be as follow:

Atlantiks in the centre on lenght of the tank. On each side would be led bar, then t5 fixture then led bar again.

If this is not enough, Ill get another Atlantik and 2 more daylight led bars.

I have also ordered the glass for the bottom and top bracing. So that is also in the works.
 
Joined
2 Jun 2016
Posts
722
Reaction score
303
Location
Potchefstroom
This morning I collected the glue to start putting this overflow box together. Must say it went quite well. Just waiting for the bulkheads then I can finalise glueing the rear panel. Waiting on an eta for when my Orpheks will arrive, then I have most of the equipment to start building and commissioning.
IMG-20200803-WA0013.jpg
IMG-20200803-WA0011.jpg
IMG-20200803-WA0015.jpg
 
Top Bottom