2-in-1 reactor
- Thread starter neil.h
- Start date
Also interested. Would be nice to see pics of this working and some info on it.
Joint shipping?
I'm literally around the corner from you
Sounds good!
Marco please also let me know if you agree with ziyaads post in another thread and let me know if you've tried it.
tagging along as i want to fluidise the rowa in the 2 in 1. will same me lotsa hassles.
BTW leme explain why i could not fluidise it - it just filled up with water and started leaking. when i put the Brighwells extrax phos it flowed through perfectly
Has the 500lph pump
BTW leme explain why i could not fluidise it - it just filled up with water and started leaking. when i put the Brighwells extrax phos it flowed through perfectly
Has the 500lph pump
butcherman
Moderator
what does this reactor look like? dimensions?
i want the one with 2 canisters also.
Marco?
hello guys....sorry , been off line....hectic on site.
yip the dual reactors work well.....just need to add a bigger pump......hx6520 or hx 6530 with valve to adjust the flow (if you wanna use rowa)
i have even sent the units out with flowtek 1200 pumps on....work well
just remember though as with most reactors if there is a restriction....which you should not get unless sponges are used or the pump intake is blocked then you should get it to fluidise if the right size pump is used.
the design of our repackable cartridge alows for even distribution of water through out the chamber at all times.....weather fluidizing or not.
it does noty let little "rivers" to form in the chamber
yip the dual reactors work well.....just need to add a bigger pump......hx6520 or hx 6530 with valve to adjust the flow (if you wanna use rowa)
i have even sent the units out with flowtek 1200 pumps on....work well
just remember though as with most reactors if there is a restriction....which you should not get unless sponges are used or the pump intake is blocked then you should get it to fluidise if the right size pump is used.
the design of our repackable cartridge alows for even distribution of water through out the chamber at all times.....weather fluidizing or not.
it does noty let little "rivers" to form in the chamber
butcherman
Moderator
is anyone still using the as a NP reactor?
Don't think you'll get the tumbling action in that reactor.
I would use the Reef Octo Pellet reactor - it tumbles the pellets well and it has a strainer to stop pellets from leaving the reactor.
butcherman
Moderator
what about using the two little fish PO4 reactor?