How many plugs does your fishtank use
- Thread starter Johan van Aardt
- Start date
my last count was 32 powered devices...again not all on at the same time.
Johan van Aardt
I love marines [R.I.P.]
Pics of db boards? RiaanP?
Still have to built it up. On my new setup. On my current setup, using multiplugs. Not very neat.
For new setup, I will have dedicated wire from DB board to tank.
Will be using normal wall mount electrical units.
First a stove switch. That switch off both Live and Neutral. Price around R135
4 Single wall plugs 12*8cm for timers for lights. About R36
4 Double wall plugs 12*12cm for about R52.
All mounted inside a fibreglass cabinet.
Total price R487, cheaper than a DB board. And I can switch and plug out everything normal.
For new setup, I will have dedicated wire from DB board to tank.
Will be using normal wall mount electrical units.
First a stove switch. That switch off both Live and Neutral. Price around R135
4 Single wall plugs 12*8cm for timers for lights. About R36
4 Double wall plugs 12*12cm for about R52.
All mounted inside a fibreglass cabinet.
Total price R487, cheaper than a DB board. And I can switch and plug out everything normal.
Ive got 12 as well,
Mekaeel
Moderator
Pumps - 5
Lights - 3
Carx - 2
Ph Monitor - 1
Kalk stirrer - 1
ATU - 1
Chiller - 2
ZeoRx - 1
Skimmer - 1
Total - 17
Lights - 3
Carx - 2
Ph Monitor - 1
Kalk stirrer - 1
ATU - 1
Chiller - 2
ZeoRx - 1
Skimmer - 1
Total - 17
Last edited:
Tobes
Retired Moderator
My new tank will have
lights - 6
pumps(4x seio's, return, RO -topup) - 6
skimmer - 1
charger(power back up) - 1
relay(power back up) - 1
carbon reactor - 1
phophate reactor - 1
kalkstirrer - 1
heaters - 2
ph meter - 1
That is 21 - if I remembered all
lights - 6
pumps(4x seio's, return, RO -topup) - 6
skimmer - 1
charger(power back up) - 1
relay(power back up) - 1
carbon reactor - 1
phophate reactor - 1
kalkstirrer - 1
heaters - 2
ph meter - 1
That is 21 - if I remembered all