Awesome new products
TSR is proud to be the new agent in SA for Aqua-trend.
Some very cool stuff on the way including a new aquarium computer which will be available soon.
check out some of the items
new dosers these come in slave versions and with built in control
Doser info
Basic parameters of the dispenser:
- Twenty-four real-time clock
- Seven days calendar
- Non-volatile memory with processor battery backup
- Support for seven peristaltic pumps (three pumps integrated into the main unit with 4.5ml/min performance + possibility to connect an additional module with four pumps with a capacity of 4.5ml/min, or a Fast Module with three pumps with a capacity of 40ml/min
- Perfect, independent calibration of each pump (during the calibration process the driver measures the pump running time in milliseconds and the stored value is used in further work of the dispenser)
- Resolution of dosing in the range of 0.1-5ml every 0.1ml
- Resolution of dosing in the range of 6-200ml every 1ml
- Minimum single dose - 0.1ml
- Maximum single dose - 200ml
- Possibility to program any, unique dose within the range of 0.1-200ml for each hour, each day of the week (a total of 168 unique doses per week for each of seven pumps)
- The possibility of week programming (a dose is recorded automatically for all days of the week)
- Manual switching of pumps
- Monitoring of liquids consumption in tanks (the driver counts down the set volume of fluid from the tank volume introduced and informs us when the fluid level drops below 90% of content)
- Dispenser is equipped with proven, high-quality peristaltic heads that thanks to ? Rigid? coupling with the drive gear ensure accurate and repeatable doses dispensing.
Top up systems
Basic top up
Top up Info
Automatic top-off system "Levelautomatic" by Aqua-Trend is a modern and reliable device, allowing you to forget about the daily refilling of evaporated water in your tank.
It is easy to use and compact, with two integrated, independently acting float switches, one f serving for ensuring a constant water level in the reservoir and the second protects the system against overflow in case of failure of the first float. In addition, the device has a time delay module, which effectively eliminates the pump start due to uncontrollable surge of water.
The float sensor is attached to glass with a very strong suction cups made of high quality silicone.
Automatic top-off system can be connected to any pump, valve, or other device with a power of up Principle:
The first float controls a water pump or solenoid valve connected to the top-off system, at the time of lowering the preset water level the device switches on pump or valve and complements the evaporated water to a predetermined level.
The second float acts as a protection of the first one, in a situation when the first float is locked in the ?operate? position of the pump / valve (due to damage, for example, was blocked by a snail etc.) water rising above the state maximum level of triggers the second float, which will block the pump / valve, this condition is indicated by red LED showing the "critical level"
Auto top up Evo
Evo info
The device is distinguished by its modern design and innovative technology solutions. Traditional float switches are replaced by moisture detectors that detect the presence of water through the sump or aquarium glass (maximum thickness of glass is 10mm). By eliminating mechanical parts maximum safety and unparalleled reliability was reached.
The refill is equipped with two detection sensors. One of them is used to control the water level in the tank, and the other works as a protection. The refill also has a siren that warns you if a safe level of water was exceeded.
There is an optional possibility to connect third sensor that will inform the user about ending reserve of water in the tank, from which it is drawn.
At any time, you can manually run the water pouring through the button located on the panel of the housing.
The device is equipped with a hermetically sealed power outlet rated at 500W.
This modern system was enclosed in attractive satin aluminum housing.
Operation principle
The device is equipped with two detection sensors, which are fixed to the glass (outside the aquarium or sump) using double-sided tape.
The first sensor controls the operation of water pump or electro-valve connected to the refill. When the preset water level drops, the device switches the pump or electro-valve on and supplements the evaporated water to a fixed level.
The second sensor acts as a protection of the first one in case of its failure. The level of water rising beyond the desired level triggers the second sensor that locks the pump. This state is indicated by illumination of the red LED "critical level" and by starting an acoustic signal.
The emergency sensor can also be used as a anti-flooding sensor, placing it on the floor on a glass or plastic plate.
There is an optional possibility to connect the third detection sensor that can be placed on the tank from which water is drawn. In case the water level drops, preventing safe operation of the pump, the device will switch off the pump and trigger an acoustic alarm.
AQUARIUM COMPUTER INFO TO FOLLOW