So after being a member for 2.5 years I think it's time for my tank thread.
Current System Specifications (As of 09 March 2012)
Age: 23 months (started on 14 April 2010)
Display: 150cm X 60cm X 70cm high, water level at 62cm
Stand: 1.1m high with mid level for 60L ATU reservoir and frag tank
Sump : 120cm X 45cm X 40cm, DSB with macro algae on top
Return Pump: Lifetech AP4660, 4800LPH split between reactors and return line
Skimmer: Internal Reef Octopus Bubble Blaster 2000
Lights: 2 X 250W MH Aqua Medic Pendents with 20K BLV globes, and 2 X 54W T5 Giesemann actinics
Reactors: 2 Skims FM100 fluidised reactors for carbon and phosphate remover
Flow: 2 X Tunze 6105 pumps running on the 7096 controller in wave motion mode
Dosing: Profilux Quad doser with built in controller. Dosing alk, ca and mg
Battery Backup: 600W Cotek ST600 pure sinewave inverter with 102AH deep cycle battery and 3 stage battery charger
Frag Tank: 70cm X 50cm X 20cm
Frag Light: 4 X 24W Reef Inmates Unit with Giesseman tubes
Flow: Tunze 6055 on same 7096 controller as main display
And this was what it looked like the day the cycle started.
Current System Specifications (As of 09 March 2012)
Age: 23 months (started on 14 April 2010)
Display: 150cm X 60cm X 70cm high, water level at 62cm
Stand: 1.1m high with mid level for 60L ATU reservoir and frag tank
Sump : 120cm X 45cm X 40cm, DSB with macro algae on top
Return Pump: Lifetech AP4660, 4800LPH split between reactors and return line
Skimmer: Internal Reef Octopus Bubble Blaster 2000
Lights: 2 X 250W MH Aqua Medic Pendents with 20K BLV globes, and 2 X 54W T5 Giesemann actinics
Reactors: 2 Skims FM100 fluidised reactors for carbon and phosphate remover
Flow: 2 X Tunze 6105 pumps running on the 7096 controller in wave motion mode
Dosing: Profilux Quad doser with built in controller. Dosing alk, ca and mg
Battery Backup: 600W Cotek ST600 pure sinewave inverter with 102AH deep cycle battery and 3 stage battery charger
Frag Tank: 70cm X 50cm X 20cm
Frag Light: 4 X 24W Reef Inmates Unit with Giesseman tubes
Flow: Tunze 6055 on same 7096 controller as main display
And this was what it looked like the day the cycle started.
Last edited: