Search results

Plenty of heaters to use. A pump for the ATU and I know that there must be two T5 dual ballasts 24W laying around somewhere.

A 5.800 l/h Sicce pump And a temperatur controller, which allows me to run the temperature with 0.1 degrees accuracy.

Level controller a Aqua Medic 10.000K metal halide PH controller

A light controller An old Berlin skimmer with Oceanrunner An inverter

Thanks guys. So far nothing spectecular. But what about all this junk? I have so much stuff laying around. That tank is going to be so much more different the I originally had planned. Let's see...

I added a ground probe and that was the worst thing I did. Only because the that the earth leakage didn't trip. So if you add a ground probe, make sure it trips when there is voltage in the water. If it doesn't trip when there is voltage in the water, you create a current. With the current...

Damn, that's the title I choose? Can't even remember. :whistling:

I'm not saying anything.:whistling:

I'm not gonna say anything.

When I saw the picture of the slab, I had the same thought. Will this slab hold the weight? Especially after digging underneath it for the plumbing. :whistling:

Your cleaner shrimp did moult most likely. Then they are very vulnerable.

That's the nearly finished product. Now the real work starts. Filtration, lights and most important aquascaping. Having a width of 600mm with a height of only 500mm, there will be something awesome possible. Got already a rough idea.

I should have taken more pictures with more detail. What you can't see is that the front panel is 6cm wider than you can see it. So I put screws from the back of the panel into the poles. Same I did with the horizontal wood pieces. Take note that the sidepanels stand out more than the front...

Now it's taking shape.

Yes it is. Once seen such option, you get the idea with what one can play with. Even wall paper. Every two years painted in a new colour and the stand goes with the fashion.

Front panel with poles

Side and front panels are covered. Now I mounted the wood to the side panels.

After cutting the fabric, I covered the side and front panel.

The stand and tank is already standing in front of me. So you can compare soon what the reality looks like.

Thanks bud. Kinda missed Masa