Can you please share this?
I've been asking for the settings and I almost thought it's a secret.
Zetlight LED club
- Thread starter leslie hempel
- Start date
I've been asking for the settings and I almost thought it's a secret.
Got two on my tank.
Sunlight
W = 35
BG= 80
Red = 30
BV = 80
Sunlight
W = 35
BG= 80
Red = 30
BV = 80
Got them about 300mm off surface of water.
- Joined
- 30 Jun 2018
- Posts
- 107
- Reaction score
- 24
I run my Z8300 UFO's on the same setting, my Corals are growing like crazy.
Use this from 18H00 to 22H00
W = 0
BG =0
Red= 90
BV = 90
Makes colours pop
Night time
BV = 1
Rest of the channels at 0
W = 0
BG =0
Red= 90
BV = 90
Makes colours pop
Night time
BV = 1
Rest of the channels at 0
- Joined
- 30 Jun 2018
- Posts
- 107
- Reaction score
- 24
Thanks for the info, will try those settings.
Keshen
Nano Addiction
Morning Guys, does anyone have a secondhand Zetlight for sale, it's for a fish only tank. Tank dims 1120mm x 500mm x 750mm
Will have a look and post it no problem
Hey Guys, I just started my adventure with Zetlight UFO 8200. I set up them in my Red Sea Reefer 170 with lps corals. After short time I noticed that my acans lost colours little bit. Can someone tell my some settings for this lights to LPS stockade? Since I found something online but I'm not happy neither my corals.
Hi, i purchased 2 zetlight 4000-895 with controller i200 and its connectors. Problem i'm facing is that when i press G, select Group and than when indicated to turn on light, i turn the light ON, it only flashes once and does nothing, no 8 time flash and no sync? What am I doing wrong here?
- Joined
- 10 Oct 2018
- Posts
- 70
- Reaction score
- 4
Hey MASA,
I need help with a Zetlight UFO ZE 8300, I have a Red Sea 130. No fish at present but a hammer, mushroom will be back in the tank from Monday.
Have replaced the hood for a LED solution now. However i am a complete novice with this stuff.
What is the best way to setup this light and what colours should i be setting and at what strength? How does one acclimate the corals to a new led light?
Does someone have a schedule of times of when to run what setting?
The light is running with the standard setting. As below.
Any help will be greatly appreciated.
[GALLERY=media, 11753]Screenshot_20190118-211842_Horizon Aqua by RapaNui posted 18 Jan 2019 at 22:24[/GALLERY][GALLERY=media, 11752]Screenshot_20190118-211835_Horizon Aqua by RapaNui posted 18 Jan 2019 at 22:23[/GALLERY][GALLERY=media, 11751]Screenshot_20190118-211827_Horizon Aqua by RapaNui posted 18 Jan 2019 at 22:23[/GALLERY][GALLERY=media, 11750]Screenshot_20190118-211816_Horizon Aqua by RapaNui posted 18 Jan 2019 at 22:23[/GALLERY][GALLERY=media, 11754]Screenshot_20190118-211847_Horizon Aqua by RapaNui posted 18 Jan 2019 at 22:24[/GALLERY]
I need help with a Zetlight UFO ZE 8300, I have a Red Sea 130. No fish at present but a hammer, mushroom will be back in the tank from Monday.
Have replaced the hood for a LED solution now. However i am a complete novice with this stuff.
What is the best way to setup this light and what colours should i be setting and at what strength? How does one acclimate the corals to a new led light?
Does someone have a schedule of times of when to run what setting?
The light is running with the standard setting. As below.
Any help will be greatly appreciated.
[GALLERY=media, 11753]Screenshot_20190118-211842_Horizon Aqua by RapaNui posted 18 Jan 2019 at 22:24[/GALLERY][GALLERY=media, 11752]Screenshot_20190118-211835_Horizon Aqua by RapaNui posted 18 Jan 2019 at 22:23[/GALLERY][GALLERY=media, 11751]Screenshot_20190118-211827_Horizon Aqua by RapaNui posted 18 Jan 2019 at 22:23[/GALLERY][GALLERY=media, 11750]Screenshot_20190118-211816_Horizon Aqua by RapaNui posted 18 Jan 2019 at 22:23[/GALLERY][GALLERY=media, 11754]Screenshot_20190118-211847_Horizon Aqua by RapaNui posted 18 Jan 2019 at 22:24[/GALLERY]
- Joined
- 5 Feb 2019
- Posts
- 2
- Reaction score
- 0
What is your setting for sunrise?
