Zetlight LED club

Hi all.
I am running Zetlight ZS-7000 on my tank.
Anybody uses them as well that can assist with the settings to get the best results and growth on sps with these lights.
 
Does any one know if the ZT6500 q1 (remote version) can be converted to using wifi? Anyone done this and can it run of the app?

You should be able to with the A200 and an audio jack splitter, check post #364 on this same thread.
 
Hi all.

Hoping someone can assist.

My new qmaven 2 6600 has an issue, It keeps losing the time. Schedule stays the same but the time keeps changing after loadshedding.

I read somewhere on the forum that the unit has a built in battery? any instructions on how to change the battery?

Thanks
 
Hi all.

Hoping someone can assist.

My new qmaven 2 6600 has an issue, It keeps losing the time. Schedule stays the same but the time keeps changing after loadshedding.

I read somewhere on the forum that the unit has a built in battery? any instructions on how to change the battery?

Thanks

Have you had any reply to this? I have the same issue. I even contacted Zetlight support but got no response from them.
James
 
Nothing yet:m29: still need to login after each loadshedding and reset the time
I had this issue with my 6600. Changed the internal battery and sorted out the issue.
 
If you have WIFI at home, connect to that rather as it will use internet time to update, I do this with my Qmarven 2 and Qmarvens with A200 controller.
 
I had this issue with my 6600. Changed the internal battery and sorted out the issue.
Hi was this the qmaven2? how difficult was it to replace and where about is it in the unit?

If you have WIFI at home, connect to that rather as it will use internet time to update, I do this with my Qmarven 2 and Qmarvens with A200 controller.
That's the thing mine is connected to my router. My lancia 2 on freshwater tank works perfectly doesn't lose a minute of time.
The 6600 everytime there was loadshedding its behind by a few hours. I need to then open the app and re set the time.
 
Hi was this the qmaven2? how difficult was it to replace and where about is it in the unit?

Not the q maven 2. Very easy to change though. Should be same concept. Less than 10 mins. The battery is on the pc board. So will be on the side panel were your power plugs into. Takes 1 or those flat batteries, same as your car remote battery etc.
 
Evening reefers. Got myself 2 qmaven 2 6600 soo now I can get some corals for my tank. Still learning these lights and playing around to get the correct setting but they are very nice lights.
 
My tank.
 

Attachments

  • 20210624_192704.jpg
    20210624_192704.jpg
    108.3 KB · Views: 59
  • 20210624_192627.jpg
    20210624_192627.jpg
    70.4 KB · Views: 57
  • 20210624_192651.jpg
    20210624_192651.jpg
    124 KB · Views: 57
  • 20210624_192635.jpg
    20210624_192635.jpg
    114 KB · Views: 56
Hey guys can the Zetlight 6600 Qmaven be connected to WiFi. Via one of the WiFi gadgets ect. Like in the picture attached?
 

Attachments

  • Screenshot_20210715-150653_Chrome.jpg
    Screenshot_20210715-150653_Chrome.jpg
    59.4 KB · Views: 39
Hey guys can the Zetlight 6600 Qmaven be connected to WiFi. Via one of the WiFi gadgets ect. Like in the picture attached?
No it can not be used with I200R, you need an A100 or A200 and use 3.5mm headphone cable and plug in to the IN on light and the output on controller, then on remote press IN button. A100 uses Zetlight App and A200 uses Horizon App
 
Evening reefers. Got myself 2 qmaven 2 6600 soo now I can get some corals for my tank. Still learning these lights and playing around to get the correct setting but they are very nice lights.
Evening buddy. Its a great light if programmed correctly. I have it myself and growing many bright coloured corals including sps. Well my tank is more sps dominated but do have softies and lps :m06:
 
Back
Top Bottom