Via aqua 300 - shaft needed

Discussion in 'Wanted' started by kssquared, 17 Jun 2008.

  1. kssquared

    kssquared

    Joined:
    27 Nov 2007
    Posts:
    159
    Likes Received:
    0
    Location:
    KZN
    Ok so it wasn't my finest hour. Managed to get a second hand filter from peter and whilst i was cleaning it i broke the ceramic shaft ! Anyone know where i can get one ?
     
  2. AdS Guest




    to hide all adverts.
  3. jacquesb

    jacquesb Retired Moderator

    Joined:
    29 May 2007
    Posts:
    17,868
    Likes Received:
    69
    Location:
    Cape Town
    Hi KSSquared - what model pump is on this? Won't Sean at Northlands Pets have some? Or alternatively - don't you have other older blown power-heads, that you can try/take the stainless steel shaft from their impellers? Or perhaps use another old pump's complete impeller (see if it fits!)?
     
  4. kssquared

    kssquared Thread Starter

    Joined:
    27 Nov 2007
    Posts:
    159
    Likes Received:
    0
    Location:
    KZN
    Thanks Jacquesb, I have successully modified a stainless one from another pump !! Now I have overcome that hurdle, I find there is a tiny crack on the valve (the bit that joins the hoses to the filter with the valve/tap on it) !!
     
  5. jacquesb

    jacquesb Retired Moderator

    Joined:
    29 May 2007
    Posts:
    17,868
    Likes Received:
    69
    Location:
    Cape Town
    Eish... ok - good luck man! Won't some Alcolin Aqua Putty solve the leak perhaps? (get from hardware stores)...
     
Recent Posts

Loading...
Similar Threads - aqua shaft needed Forum Date
via aqua 300 shaft Wanted 28 Dec 2008
Wanted Via Aqua VA 2600 shaft ► Sponsor Request Forum 13 Nov 2007
AquaForest Now in stock Sponsor Specials 17 Nov 2016
10 WET N WILD Specials @ Aquaria this weekend Sponsor Specials 10 Nov 2016
up to 25% discount on complete aquariums Sponsor Specials 31 Oct 2016
The reason Marine Aquatics was born General Discussions and Advice 30 Oct 2016
Marine Aquatics Tanks Marine Aquatics 30 Oct 2016