The DSR panoramareef

Looking good. Jo I think cutting coral with a knife when fragging is terrible. You tune hom with a grynder:m01:
 
Tuesday, oktober 19, 2021 - #panoramareef - the morning after. This is how things looked like the morning after the #DSR1200reef and #butterflyreef was moved to panoramareef section2/3
sectie2/3
708eb101521e910c7332d88a260d5a10.jpg
c6ecf53da25af2f908c9299e3ee9aaab.jpg
9af8c8ec4448e7dee596efdea64035ec.jpg
 
Saterday, oktober 23, 2021 - #panoramareef - the liftmechanism. Because the lightfixture was sitting on top of section2 i was not able to do any scaping to make place for the other corals, so i needed to mount the lifting mechanism to get acces to the tank. It took some measuring, fitting and welding to designing a mounting piece for the wire to bend the corners. But finally it was done.

6af602e7058203c83544834bb7cdd3fe.jpg
31f25e8e005a6bf30aca8970567183a2.jpg
0d5a74d9fa0d718192f4b8f2d06696e8.jpg
8a39c82fe050cf2f07914f3bfe6b72dd.jpg
bf509b830c8a93453b4a080dd0721fef.jpg
fc4ccd0c67c277532bbbab128508b386.jpg
 
Saterday, oktober 16, 2021
. #panoramoreef - sump?
I wasn't sure whether i wanted a sump, because of the energy spills of moving large volumes of water up all the time.
First i planned to use 2-3 surface skimmers, but each have moving part in full light, which would require extra maintenance. I had some glas lying around, so just to be save i decided to build a sump anyway.
Because the stand was already build, filled and operational, it was not possible to place a single sump required to hold enough water without removing a support beam.
So the sump was build in 2 pieces and put together on the spot.

2db3ad9f8b3c6f981450c0343d38ff68.jpg
5511da4aa4edb56d6704e49e9c454a79.jpg
37f94ce83b66ad6dded7aa365a1fe51f.jpg
72b7245122eedcea62698a7561d4e59f.jpg
e00aed66035036d4afa42d1789a2cc61.jpg
cb707daa515921215503ec2550cb7719.jpg
 
Wednesday, oktober 20, 2021 #panoramareef- placing the sump.

The sump was placed between the support beams. A few days later (oktober 25) we made aditional saltwater in the sump to raise the waterlevel of the tank to be able to activate the sump.

The main reason for me to install the sump is the surface skimming and secondly i didn't want to extend and recalibrate the water intake of the KHD.


bb4658fe43ac24098fcc17d8b16d9bc0.jpg
7934c6fd3a29fac0b51644bd1714f13f.jpg
ec45effc5322bf38338892c4183c2ffb.jpg
f13d4454bfbb923027ff0a3beb8e85ff.jpg
bbced146adc2a9812ea26e13db0e0756.jpg
469002841601ef99df5e5fe2498c863e.jpg
1bc51d02ade27ff1224235565f6e581c.jpg
4e8391b4ac6cacf857f5e439e733d974.jpg


46d561e9c0de53262080f883279fd65d.jpg
 
Tuesday, November 16, 2021, The #panoramareef is in the starting phase with all the up's and downs that goes with it. Now you have to be careful not to rush things .

I also went shopping at my main supplier of supplements.

I feel Blessed to have a GHL Profilux4 and accompanying KHD running.

The KHD calculator has been adjusted for EZ2Go and is on testing phase.

After a false start where dinos and then algae got the upper hand, the light has been off for 3 days and 10 urchins have been added.

Patience is a virtue. The photos speak for themselves.


83056dd7060b47b8c3f2558674f4c0ad.jpg


cfc110e81c1c3069209c00322fba6294.jpg


24ff0f3c10997dd6565d72a1d341e3b7.jpg


0fb273b001def112765a4ad4a09a73c9.jpg


4abe5af5a3bad4fea5bf3dd6dda36e6b.jpg


1f2b411545240dd139328ffaaa18ad4a.jpg


ea75593e7d08c20cec8f4c42da5199c0.jpg


c26a68da73c732edb95b981e4d510d69.jpg
 
This is a movie of the panoramareef about one month from the startup.
The GHL KHD take out a lot of time dailing in the system. Now it's realy running on cruise control with EZ2Go

Dit is een film van het panoramareef ongeveer een maand na de opstart.
De GHL KHD bespaar5 veel tijd met het inregelen van het systeem. Nu draait het echt op autopiloot met EZ2Go

 
Into the blue's
Unusually beautiful when illuminated differently.
We already know that green fluorescents....
A simple red gonio has blue tips and subtle golden edges.
A simple silver/blue montipora appears to glow green.
A normally dull acropora spatulata turns into a golden coral
697779c6b7f1625f439651c0c8459f4e.jpg
f72ddcca26f04296715fe2420ffdeb41.jpg
678452ea693f18022182a6fa0ecc7679.jpg
a56f74fc257fb20f9321be70addb36d5.jpg
abd0b56f12dfba076f0ecabe6c483713.jpg
3d8ba268f226c87f52dcbd908a9aa6d7.jpg
6868fe565480ece0bf98c690c5aa1963.jpg
1c9d44201f3ac04a60ca899928b2b3a7.jpg
2193bca1a923ebfd9e385ec5aa9ba080.jpg
74b223c18e62b9ae4077f1444cf8f1fc.jpg
8c6776cbfc54a5ad7acd8b72ac8f8626.jpg
 
Today i removed the barrier between section2/3 and the butterflies had acces to a new section. They loved it....


This is the movie i made today:


 
These are all the system i have running now.
The total consumption of all tanks during daytime (15:30h) is about 4700watt
Average light period= 13hours
(2300+1050+1080+120+120)
The total water volume is ~ 6100 liters
I estimate all the tanks uses ~65KWh per day.

bfab6844182a4776e5b31af65bc1c0b4.jpg
66a35ff6e4fe3c41a2e3385c002973d5.jpg
074c754268f7fa3325153671fc8592a4.jpg
 
Back
Top Bottom