Skimmer Help,Urgent

Joined
3 May 2008
Posts
690
Reaction score
51
Location
Pretoria
Guys I adjusted the height of my skimmer a bit and now it overskims completely,is this normal to happen after changes and it skims very uneaven,please help
 
do you mean you raised the actual skimmer?what skimmer is it?
 
What skimmer is it?

Is it pouring water into the cup?
 
Dude- what kinda skimmer hight lower in the water now (I assume so) and finally - pics please.

If it is lower in the water, it's "natural" cause the skimmer's too low now, however it's easy to assume with out pics
 
Its a macro aqua skimmer,I tuned it to let the optimal waterflow through but on minute the water is streaming into the cup and the next its way down in the skimmer,sory cant upload pics now
 
with a 1200 l/h pump,it was working fine but everytime I adjust the height of it it skims very uneavenly and then overflows and then underskims
 
Looking at the pic of that skimmer it looks as if there are not enough bubbles in the reaction chamber. there may be a blocked pipe some where, it may also be a blocked air line/venturi on the pump.
 
Back
Top Bottom