Show Aquarium Tunze Clear Out

Discussion in 'Hardware For Sale/Swap' started by flappy, 7 Apr 2015.

Thread Status:
Not open for further replies.
  1. flappy

    flappy

    Joined:
    18 Jul 2007
    Posts:
    1,273
    Likes Received:
    52
    Location:
    Cape Town
    Hi Guys and Girls

    We are currently moving and as a result have sold our show aquarium...here are some awesome deals on some Tunze equipment we used on our show aquarium.

    Below is the Y Adapter, never been installed R390

    Extends two output connections to 2 x 2 input connections; including 4 connection cables 7092.30.

    [​IMG]



    Below are 4 x 6105 controllable Tunze pumps...R2500 each

    [​IMG]

    For aquariums from 200 to 2,000 litres
    Flow rate: 3,000 up to abt. 13,000l/h
    Energy consumption: max. 35W - 24V
    Power supply unit: 100-240V / 50-60Hz
    Cable length: 5m
    Dimensions: diam. 90mm , Output: diam. 50mm
    Magnet Holder up to a glass thickness of 15mm
    Ejection: diam. 63mm

    I also have 1 x 6125....R1850

    For aquariums from 400 to 2,000 litres
    Flow rate: abt. 12.000l/h
    Energy consumption: 22W
    Voltage / frequency: 230V/50Hz
    Cable length: 2m
    Dimensions: diam. 90mm
    Ejection: diam. 63mm
    Magnet Holder with Silence clamp up to a glass thickness of 15mm





    I also have around 8 Tunze magnets, can attract through 20mm glass.......R390 each

    Magnet extension
    (6205.501)

    The unit extends the holding power of Magnet Holder 6065.515 and 6105.515 from a glass thickness of 15 mm to 20 mm.



    I also have a 7095 controller R1250
    [​IMG] [​IMG]
    [​IMG] [​IMG]
    [​IMG] [​IMG]
     
  2. AdS Guest




    to hide all adverts.
  3. flappy

    flappy Thread Starter

    Joined:
    18 Jul 2007
    Posts:
    1,273
    Likes Received:
    52
    Location:
    Cape Town
    We are selling these great pumps as the show aquarium was sold...
     
  4. flappy

    flappy Thread Starter

    Joined:
    18 Jul 2007
    Posts:
    1,273
    Likes Received:
    52
    Location:
    Cape Town
    Bump
     
  5. DaneMac

    DaneMac

    Joined:
    18 Mar 2015
    Posts:
    67
    Likes Received:
    1
    Location:
    Noordhoek
    How much would you take for all of it?
     
  6. flappy

    flappy Thread Starter

    Joined:
    18 Jul 2007
    Posts:
    1,273
    Likes Received:
    52
    Location:
    Cape Town
    As advertised it all adds up to R15 050.
    If you took everything I will take R12 000.
     
  7. flappy

    flappy Thread Starter

    Joined:
    18 Jul 2007
    Posts:
    1,273
    Likes Received:
    52
    Location:
    Cape Town
    Bump
     
  8. flappy

    flappy Thread Starter

    Joined:
    18 Jul 2007
    Posts:
    1,273
    Likes Received:
    52
    Location:
    Cape Town
    Anyone keen on these Tunze pumps?
     
Recent Posts

Thread Status:
Not open for further replies.