Saga ph controller help

Kevin Whitlock

Kevin Whitlock

Joined
13 Sep 2021
Posts
77
Reaction score
21
Location
Port Elizabeth
Hello all.
Been searching the www but have found no help trying to set up my saga ph controller,
No English versions or any helpful advice! The manual is vague and the few non English vids are not helpful and differ so from each other its ridicules.
I may end up tossing this thing in the bin.
Please any advice and or directions to set this thing up would be great. I have bought a fresh batch of solutions for calibration.
Thanks Kevin
 
Dexter said:
Post a pic. They fairly simple to setup usually
Click to expand...
20230201_085517.jpg
 
If I remember out of my head....
Put on pH setting....
Then insert the probe in the pH 4 solution. Dial the pH 4 button marked 4 as close as you can get it untill the screen reads 4
Then do the same for pH 7.
Then slide the setting to set. That's were you want to adjust your pH level. If you want it on 6.5 then just dial the set button untill the screen reads 6.5.
Bobs your uncle
Hope I got it right. Been a while since I fiddled with one
 
Dexter said:
If I remember out of my head....
Put on pH setting....
Then insert the probe in the pH 4 solution. Dial the pH 4 button marked 4 as close as you can get it untill the screen reads 4
Then do the same for pH 7.
Then slide the setting to set. That's were you want to adjust your pH level. If you want it on 6.5 then just dial the set button untill the screen reads 6.5.
Bobs your uncle
Hope I got it right. Been a while since I fiddled with one
Click to expand...
Hi, got it calibrated. Thank you for the help.
 
Kevin Whitlock said:
Hello all.
Been searching the www but have found no help trying to set up my saga ph controller,
No English versions or any helpful advice! The manual is vague and the few non English vids are not helpful and differ so from each other its ridicules.
I may end up tossing this thing in the bin.
Please any advice and or directions to set this thing up would be great. I have bought a fresh batch of solutions for calibration.
Thanks Kevin
Click to expand...
Hi Kevin,
I can help you with the controller.
I think the easiest will be a call when you siting at your controller. You need to have a small flat head screwdriver and the calibration fluid on hand and then I will talk you through the process. Maybe WhatsApp me to see when I am free. (0737024556). I dont go onto this forum often so rather drop me a WhatsApp message.
Regards
Craig
 
You must log in or register to reply here.
Back
Top Bottom