Decided to start a new reef project for spring/summer 2015.
Very very excited as always. Never really had anything running long term or short term for that matter.
Guess i just enjoy design and building reef tanks. 
Started this weekend at building the stand. Absolutely happy with the outcome. Here goes, hope you enjoy!
Stand size : 600mm x 600mm x 900mm
Wood sizes:
600mm x 55mm x 35mm (x4)
530mm x 55mm x 35mm (x4)
790mm x 55mm x 35mm (x8)
900mm x 55mm x 35mm (x4)
900mm x 35mm x 35mm (x4)
For the top and bottom parts i used the 600mm x 55mm x35mm & 530mm x 55mm x35mm.
Put the 900mm x 35mm x 35mm (x4) on the inside of the top and bottom parts.
Put the 790mm x 55mm x 35mm (x8) on the corners to strengthen and complete the frame. 2x lenghts per corner.
That's all i have for now. Next up. Filling the holes and sanding the frame to get it ready for primer, paint & sealer.
Very very excited as always. Never really had anything running long term or short term for that matter.
Guess i just enjoy design and building reef tanks. Started this weekend at building the stand. Absolutely happy with the outcome. Here goes, hope you enjoy!
Stand size : 600mm x 600mm x 900mm
Wood sizes:
600mm x 55mm x 35mm (x4)
530mm x 55mm x 35mm (x4)
790mm x 55mm x 35mm (x8)
900mm x 55mm x 35mm (x4)
900mm x 35mm x 35mm (x4)
For the top and bottom parts i used the 600mm x 55mm x35mm & 530mm x 55mm x35mm.
Put the 900mm x 35mm x 35mm (x4) on the inside of the top and bottom parts.
Put the 790mm x 55mm x 35mm (x8) on the corners to strengthen and complete the frame. 2x lenghts per corner.
That's all i have for now. Next up. Filling the holes and sanding the frame to get it ready for primer, paint & sealer.
Last edited:
