RSS RD3 Speedy is new variable speed brushless DC pump from Royal Exclusiv

Discussion in 'RSS Feeds' started by MASA Admin, 18 Jan 2011.

  1. MASA Admin

    MASA Admin Moderator

    Joined:
    8 May 2007
    Posts:
    10,126
    Likes Received:
    100
    [​IMG]

    Royal Exclusiv has just released specifications on their Red Dragon 3 speedy variable speed brushless DC pumps. These new pumps are actually an entirely new series called “Speedy” and they incorporate major improvements over other generations of Red Dragon pumps. For starters the inside magnetic lining of the pump is made of up of pure titanium, the common “O-rings” have been replaced with the “bearings made of advanced technical ceramics”. There is a Titanium-coated, laser-welded high performance NdFeB Magnet and there are no electronics located inside the pump. Royal Exclusiv says they have been tested the RD3 Speedy series for over a year now and it has finally passed testing. These pumps are advertised to be 100 percent made in Germany and with that tag you’ll pay a few more dollars euro. These will start shipping soon with a retail of 599 euro ($802).

    [Show as slideshow]
    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]





    Pump heads equipped with standard PVC fittings …
    Inclusive parable rubber buffer from 30 Shore soft natural rubber …
    Pump head can be turned on three sides …
    Bypass also rotated, so bypass operation in three directions
    Adjustable 800-8000 Litres Max. 4,5 Meter Ws… 4.5 meters .
    LED display in% and W / h
    Titanium-coated, laser-welded high performance NdFeB Magnet …
    Virtually wear-free bearings …
    Extremely break-resistant shaft, thanks to 12 mm (!) Thick axles ….
    First submersible pump worldwide with titanium and titanium shroud bearing rings …
    12 mm thick axes of advanced technical ceramics …
    Controller box in IP65 version. Pulverbeschichtetes, rostfreies Aludruckgehäuse… Powder-coated, stainless Aludruckgehäuse …
    EMC tested with appraisals, including CE certification and VDE standards, built …
    No free plug connections, controller is IP65 splash water Suitable …. ( VDE-gerecht ) (VDE-compliant)
    3-meter cable controller pump …
    Extremely low operating noise …
    In case of power failure, guaranteed re-identification of the last set speed …
    Soft start and overload protected …
    Built-in automatic shut-off blocks and automatic restart after 3 seconds …
    NO more …. control electronics in the pump
    A 100% Royal-Exclusiv own product … …
    Made in Germany …
    Tested more than a year in 50 degree hot, supersaturated salt water solution and überkalkter ….
    Almost no heat output of the driving unit. Engine remains in full load operation “cold” …
    Motor Body of distortion-free special plastic, UV-resistant and electrically fail-safe …
    Stator with tempered Kunstsoff parts in a vacuum sealed, (no bubbles)

    Advanced sine wave brushless DC technology.


    Electronics is 100 000 times already been installed in proven high-efficiency heat pumps, so free from childhood diseases.
    On Aquaristikpumpen to cut software, exclusively for this pump model, from a leading German provider of DC technology.
    Ultra-fit, plastic parts produced in Germany ..
    Related Posts:

    [​IMG]
    [​IMG]

    [​IMG]

    More...
     
Recent Posts