Project 1600 x 600 x 600

Time for a update. Sump running good and just completed ATU ot works on 4 float switches 1st & 2nd float actual water level 3rd in RO tank to stop pump and alert if RO is depleted or fault is detected 4th in sump to alert on overall sump water level witch will tell me of pump fault and over filling. All programed to give audio and visual alerts. Next would be a gsm alerts aswell
 
325ccf9a37355c557e2375b6f526ca3f.jpg
7945b56f2f3750fa1d5dd498bc399a62.jpg
1bb3e9bd1da2c47dc58ab115175a7cbe.jpg
4ae35b3f58dd347681df4662b023d33a.jpg
 
Had a GHA break out du to not checking Tds so now to get all back in check
 
Last edited:
Sorry, made mistake...

Nice looking tank
 
Last edited:
The ups and downs.
So what can i say got a call from my wife the house is under water chills ran down my spine and i thought the worst. Got home and my sp pulled apart on one side and yes water all over. Tank was still running fine and float switch made good work with shutting off all sump pumps and heaters. But running on just wave makers and a heater for 16 hours is not the best but every body is ok.
 
Sheesh...sounds familiar. Had similar hiccups when I started my tank. Quite a few times the syphon and return pump didn't agree and ended up with water all over the tiles. Glad all's okay though.
 
Back
Top Bottom