Project 1600 x 600 x 600

Joined
12 Oct 2015
Posts
386
Reaction score
103
Location
JHB
Time for a update. Sump running good and just completed ATU ot works on 4 float switches 1st & 2nd float actual water level 3rd in RO tank to stop pump and alert if RO is depleted or fault is detected 4th in sump to alert on overall sump water level witch will tell me of pump fault and over filling. All programed to give audio and visual alerts. Next would be a gsm alerts aswell
 
Joined
12 Oct 2015
Posts
386
Reaction score
103
Location
JHB
Had a GHA break out du to not checking Tds so now to get all back in check
 
Last edited:
Joined
8 May 2007
Posts
3,035
Reaction score
108
Sorry, made mistake...

Nice looking tank
 
Last edited:
Joined
12 Oct 2015
Posts
386
Reaction score
103
Location
JHB
The ups and downs.
So what can i say got a call from my wife the house is under water chills ran down my spine and i thought the worst. Got home and my sp pulled apart on one side and yes water all over. Tank was still running fine and float switch made good work with shutting off all sump pumps and heaters. But running on just wave makers and a heater for 16 hours is not the best but every body is ok.
 
Joined
9 May 2014
Posts
73
Reaction score
11
Location
Durban
Sheesh...sounds familiar. Had similar hiccups when I started my tank. Quite a few times the syphon and return pump didn't agree and ended up with water all over the tiles. Glad all's okay though.
 

Top