Review: Polario ML22 - 22000lph flow pump review

Discussion in 'Reviews' started by Rory, 13 Apr 2009.

  1. Rory

    Rory Admin

    Joined:
    5 May 2007
    Posts:
    4,852
    Likes Received:
    35
    Location:
    JHB
    Introduction

    The Polario has been awaited for years now as a cheaper option for big flow with an included controller. It's been in development and testing by years from Taam, the same guys who've made the extremely popular Seio range. Seio pumps generally were always mounted "Tunze style" ie. horizontally with the wide outlet providing horizontal flow and without the "protector" piece they come with. The newer Seio Prop pumps now come basically designed better for how everyone was already mounting the old ones. Taam also launched the magnet mount for the old Seio's and this is now included standard with the new Seio Prop pumps. Thus the "big boy", the Polario also comes standard with a magnet mount. Due to the flow provided it is unlikely anyone will ever want to hang a Polario on the side of a tank so the magnet mount makes it easy to mount the pump deeper in the tank.


    Noise
    The pump itself is extremely silent when switching on/off and changing direction. There doesn't seem to be any vibration at all. If you put your ear right next to the pump you can hear a small whine however I doubt anyone will ever notice this as the pump is generally going to be mounted behind the tank.
    The controller on the other hand contains a very small fan by the sounds of it. The fan produces a noticeable whine sometimes. It seems to be thermostat driven as it only kicks in occasionally by the sounds of it. For anyone not sleeping next to the tank (been there, done that and won't do it ever again) this won't be a problem at all. If the controller is inside a cabinet it won't be noticed either.

    In this image you can see the size of the fan in the controller. It's one of those fans that has a very small proportion of it as the "blades" so it has to spin fast because it's small and because the blades are tiny. The lighter patch to the top left of the fan is a heatsink so it's probably easy to modify this and use a bigger heatsink.
    [​IMG]

    Mounting
    The mounting is very flexible with what is probably going to be the most popular option being using the magnet mount and the pump in the center of the back wall of the tank. As with the Seios there is an "extender" piece to move the pump further "inwards". Using the extender piece you have to mount the Polario with one of the Seio type "pivots". This gives you slightly more flexibility but adds more unsightly "stuff". Using only the magnet mount the Polario has to be "straight" aligned with the wall it's on, which won't be a problem for most. The magnets are pretty large and very very strong. They should handle up to 20mm of glass comfortably.

    [​IMG]

    It also comes with adaptors to attach it to PVC pipe in a closed loop however I haven't tried this.



    Flow
    The flow from this pump is the reason for buying it and it's spectacular. The flow is very powerful yet very dispersed. It is probably more dispersed than the biggest Seio pump and slightly less dispersed than the Vortech.
    The flow "power" is obviously relative and I don't have any similar pumps to compare it to but with the flow rate setting on the controller at the very lowest it was a bit too much for my 1.2m tank. I think to put this pump up to it's maximum flow to fully benefit from it you would need to have a tank at least 1.8m wide with not too much substrate or probably 2.5m if you have an in tank DSB/plenum.
    The "strainer" parts also have "deflectors" that can be optionally fitted to try and deflect the flow away from the substrate or simply towards an area that needs more flow.


    Cords
    The cords are all a reasonable length for most people. There is a cord from the plug to the power adapter (similar to a laptop charger), and then from there to the controller. From the controller there is a thicker cord going to the pump body. This cord is most likely the one that some people will find too short, especially if you're someone who would like the cord neatly tucked away and would like the controller mounted somewhere like a control box. It has a custom plug so it doesn't look like something you could easily extend or modify.

    [​IMG]


    Controller features
    The controller is basically used for alternating the flow from side to side on the pump. If you don't wish to use the alternation feature you can set it to only do either the left or right only.
    The time delay between alternations can be set from 15 seconds up to 30 min (15s,30s,45s,1-30min). You can't set it to use different times per side, ie. 5min left then 10min right.
    The power output can be adjusted (from low to high, no indication of actual flow) however this is also for both sides and it can't be set to vary this at all. This makes this setting somewhat useless because if you "turn down" the pump you are kind of "wasting" it. It might be useful if one day you want to turn it down a bit but I don't see this happening often. I think it's use is limited because I couldn't see much difference between the lowest and highest settings.
    There is no way to "bias" the pump to one side or to vary anything basically. You set the power and the alternation period and that's it.

    [​IMG]

    The controller comes with a plug to plug in a moonlight however there is no light sensor or anything on this pump/controller so it will always be on. In addition to this there's no way to turn the power down at night other than putting the whole thing onto a timer and having it switch off completely at night. Note that if you put it on a timer it will reset to 15s intervals every time it's turned on again. It's a letdown that it has no "memory" however I'd probably always leave it on 15s anyway.

    [​IMG]
    Power, Pump, Fuse, Moonlight

    The controller features "8 min" and "16 min" feeding time buttons to "pause" the pump for a few minutes to allow livestock to eat.

    The controller works well to handle the alternation and the feed buttons are handy but people used to more advanced controllers from Aqua-Medic, Tunze or Ecotech will probably be a bit disappointed with it as there aren't many options to make the flow more "random".


    Size
    The size is a bit bigger than say 2 Seio M1100's facing in opposite directions. The design though is much less "chunky" than the Seios. Not many other pumps are designed to be mounted "flat" against a side of a tank, most are designed to point "inwards". I think this is great because you can mount the pump in the middle at the back of the tank where it's fairly easy to hide. It's almost impossible to hide pumps designed to sit on the side of the tank and blow "across".

    If needed the "strainer" parts could be removed if you're sure no small fish, anemones etc are going to try make their way into the pump. This would reduce the size quite a bit. The pump does have some "spokes" stopping larger things going through it. The "strainer" isn't that fine and some of the small fish sold in pet shops could easily fit through hence my concern with having the pump rather stop or slow down drastically at night.


    Price
    The Polario comes with the magnet mount and the controller as standard. The only "optional" part is the moonlight.
    This package sells for around R3600.

    The ML22 provides 22000lph and it is priced at about 70% of the price of a Vortech MP40w (12000lph)
    It is priced around the same as 2 Tunze Stream 6065's (each 6500lph, not controllable), a bit less than a 6105 (3000-13000lph) or half the price of a 6205 5000-22000lph). The controllable Tunze pumps would still need an additional controller to vary the pump speed but this would provide a lot more options.
    The most comparable setup in terms of flow would be 2 6205's to provide flow "both ways" and a controller. All of this would cost at least 5 times the price of the Polario (however you would have a few more features).
    Compared to more "budget" pumps you could get about 4 Resun waver (15000lph) pumps for the price of one Polario. The Resun waver comes with a controller of sorts where you set the time the pump should spend on "low", "medium" and "high" flow. Other than that there are no other options.
    The Boyu WM-2 wave maker comes in at about a third of the price of the Polario and has a similar controller to the Resun waver but they don't publish flow rates.


    Conclusion
    Clearly Taam has brought a rather competitive product to the market for creating big flow with at least some variation in the flow. I like the fact that it fits nicely in the middle/back of the tank so it can be easily hidden. The flow is absolutely awesome so if you have a big enough tank then go for it. If I start a tank over 1.8m wide this piece of equipment will definitely be on the shopping list.

    More info at the product page: TAAM Inc., Aquarium Products. NEW PRODUCT: POLARIO


    PS: I took some videos of this pump in my tank. Will add them here as soon as I can manage to edit them without the editing program crashing.

    Videos
    Overall vid, you need to look pretty closely to see some stuff flying around and the surface agitation. The tank is cloudy because of the Polario.
    YouTube - Polario ML22 in 1.2m aquarium

    Showing surface turbulence, the deflector is aimed "up" to keep flow off the substrate
    YouTube - Polario ML22 surface turbulence

    Flow over my plate coral, you can see a bunch of detritus blowing past
    http://www.youtube.com/watch?v=fQSA8X4-Ogo
     
    Last edited by a moderator: 10 Mar 2017
    Jaak likes this.
  2. AdS Guest




    to hide all adverts.
  3. FransSny

    FransSny

    Joined:
    16 Oct 2008
    Posts:
    5,697
    Likes Received:
    67
    Location:
    Hermanus
    hi rory

    love your review..awesome pump, im also running mine withe the "deflectors thingies"..have you tried it without yet?
     
  4. OP
    Rory

    Rory Admin

    Joined:
    5 May 2007
    Posts:
    4,852
    Likes Received:
    35
    Location:
    JHB
    No I haven't tried it without except in a bucket. Don't want ALL my substrate blown away... I tried it in a bucket to test the claim of the auto cut off if there's no water, it works :) The pump stops and the controller displays "00" until you reset it.
     
    Warr7207 likes this.
  5. Tony

    Tony

    Joined:
    23 Aug 2008
    Posts:
    4,092
    Likes Received:
    68
    Location:
    Honeydew, Johannesburg
    Thanks for taking the time to inform us about the powerheads. It would probably do the job of my two Vortechs but at a fraction of the cost.
     
  6. OP
    Rory

    Rory Admin

    Joined:
    5 May 2007
    Posts:
    4,852
    Likes Received:
    35
    Location:
    JHB
    Keep the vortech for the sides or from the back towards front and add a polario ;)
     
  7. Tony

    Tony

    Joined:
    23 Aug 2008
    Posts:
    4,092
    Likes Received:
    68
    Location:
    Honeydew, Johannesburg
    Jeepers, I'll have my corals hanging on for dear life. 48000LPH or 70 times internal flow of my tank. SOme serious combined flow there.
     
  8. leslie hempel

    leslie hempel Moderator MASA Contributor

    Joined:
    7 May 2007
    Posts:
    14,769
    Likes Received:
    347
    Location:
    Gonubie East London
    thanks rory that was very imformitive..
     
  9. OP
    Rory

    Rory Admin

    Joined:
    5 May 2007
    Posts:
    4,852
    Likes Received:
    35
    Location:
    JHB
    Added some vids.
     
  10. scubaninja

    scubaninja

    Joined:
    20 Jul 2008
    Posts:
    6,743
    Likes Received:
    21
    Location:
    Durban
    thanks rory!! that was an awesome review!!! i am still thinking about getting one of these so this helps buckets!!
     
  11. sunburst

    sunburst

    Joined:
    8 May 2007
    Posts:
    2,419
    Likes Received:
    24
    Location:
    Durban
    Now that was a pleasure to read. Unbiased and very informative.
     
  12. Mekaeel

    Mekaeel Moderator

    Joined:
    8 May 2007
    Posts:
    24,229
    Likes Received:
    128
    Location:
    Point Waterfront Durban
    Great review! Well put Rory! However that 'whine' can actually be heard from quite a distance even though mines is connected inside of the tank. Nothing too serious though.
     
  13. OP
    Rory

    Rory Admin

    Joined:
    5 May 2007
    Posts:
    4,852
    Likes Received:
    35
    Location:
    JHB
    Is the whine you hear coming from the pump or the controller fan?
     
  14. Mekaeel

    Mekaeel Moderator

    Joined:
    8 May 2007
    Posts:
    24,229
    Likes Received:
    128
    Location:
    Point Waterfront Durban
    From the actual pump Rory.
    Anyone else with a similar experience? I think it was Fransny who had the same issue.
     
  15. OP
    Rory

    Rory Admin

    Joined:
    5 May 2007
    Posts:
    4,852
    Likes Received:
    35
    Location:
    JHB
    Ok. Maybe I didn't run mine enough or something. Have you tried fiddling with the magnets and stuff? I ran mine for a full day on the lowest setting and then just a bit of testing here and there. Can't say there's any noticeable whine from the pump...
     
  16. irshaad

    irshaad

    Joined:
    15 Jul 2008
    Posts:
    319
    Likes Received:
    2
    Location:
    Cape Town
    Cool review! Should definitely have more of these
     
  17. Warr7207

    Warr7207

    Joined:
    28 Dec 2007
    Posts:
    12,781
    Likes Received:
    31
    Location:
    JHB
    Nice review Rory, I think this is the sum totla of all your posting for the last year ;)

    You must be really impressed if you went through all this effort, nice one :)
     
  18. Bob the (reef)builder

    Bob the (reef)builder

    Joined:
    7 May 2007
    Posts:
    1,782
    Likes Received:
    32
    Location:
    Joburg
    Thanks Rory

    Good reveiw.
     
  19. Mekaeel

    Mekaeel Moderator

    Joined:
    8 May 2007
    Posts:
    24,229
    Likes Received:
    128
    Location:
    Point Waterfront Durban
    Yip I did play with the magnets etc...But you can hear the actual noise coming from the motor inside. I havent tried the low settings, I got mines on high, I'll drop it and see how it goes.....
     
  20. OP
    Rory

    Rory Admin

    Joined:
    5 May 2007
    Posts:
    4,852
    Likes Received:
    35
    Location:
    JHB
    Thanks for all the kind comments everyone. Yes we should have more of these, anyone volunteering to send me some toys?
     
  21. ziyaadb

    ziyaadb

    Joined:
    18 Jul 2007
    Posts:
    5,578
    Likes Received:
    48
    Location:
    JHB-Lenzz
    great review
     
Recent Posts

Loading...
Similar Threads - Polario ML22 22000lph Forum Date
4 x M1500 or Polario 22ML Pumps and Waterflow 24 Feb 2011
Info on Polario 4ml Pumps and Waterflow 10 Feb 2011
Polario owners, advice please Pumps and Waterflow 18 Aug 2010
Seio setup or Polario Pumps and Waterflow 4 May 2010
Opinions on the Polario 22ML Pumps and Waterflow 1 Mar 2010
Polario Extension Cable ► Sponsor Request Forum 19 Nov 2009
Plumbing a Polario to a CLS Pumps and Waterflow 25 Sep 2009