Lowest cost and easiest way to eliminate green hair, bubble, turf and slime algae

Discussion in 'Biological/Natural Filtration and Deep Sand Beds' started by SantaMonica, 6 May 2012.

  1. SantaMonica

    SantaMonica

    Joined:
    18 Sep 2008
    Posts:
    504
    Likes Received:
    23
    Location:
    Santa Monica, California, USA
    Lowest cost and easiest way to eliminate green hair, bubble, turf and slime algae from your aquarium (hopefully permanently).

    This new test version of the algae scrubber is much easier to build than the waterfall version (the Mega Powerful one), and is perfect for nano's, and also is "power-cut-proof". This new scrubber has never been posted before May 2012. It works in both freshwater and saltwater.

    If you are like most aquatic hobbyists, nuisance algae is an ongoing problem. You try to feed your livestock, and the next thing you know, you get algae. You've already tried many fixes; some work but are expensive; some kind of work but you're not sure; and some just don't work at all.

    Think about what is happening: Your aquarium is accumulating nutrients (nitrate and phosphate) because of the food you feed. Algae eat nitrate and phosphate to grow, so the algae are having a great time growing in your water because they are eating all your nutrients! What to do?

    Well think about this: In order to grow, algae must be provided with nitrate and phosphate. So why can't you just use the algae to consume all the nitrate and phosphate? The answer: You can! How? With a simple device you build called an Upflow Algae Scrubber. It's simple, cheap, and you can make a small one in just a few minutes with parts you probably already have. I'll be posting more complex versions later, but here are some pics of the most basic design that you can use for testing:

    (will be updated periodically)
    [​IMG]




    An "algae scrubber" is a simple filter that actually grows algae in the filter, so that the algae do not grow in other parts of your aquarium. Simply put, the conditions for algae growth inside the filter are better than the conditions in the rest of your aquarium; thus the algae grow in the filter instead of your aquarium, and then you just remove the algae from the filter and throw the algae away. But in order for the algae to grow in the filter, the algae need to consume nitrate and phosphate; so guess where the nitrate and phosphate come from? Your water!

    If you stop and think about it, algae always grow in certain spots, and not in others. This is because some of the three growing conditions (light, flow, nutrients) are better in some parts of your water than they are in others. An "upflow algae scrubber" simply optimizes these conditions, and does so at a place where the algae can be easily removed and thrown away. And once the nitrate and phosphate have been removed from your water, all other nuisance algae such as green hair, bubble, turf and slime, will have a hard time staying alive.

    So where have these filters been all this time, and why haven't you heard of them if they work so well? Well the original waterfall version (the Mega Powerful thread posted in August 2008) was hard to build, and was not really for sale anywhere; so unless you liked to build things from scratch, you had no choice but to buy some other kind of filter. All the filter really needed to do was to create good growing conditions (light, flow, nutrients) for the algae, by flowing the water across a piece of rough material, so that the algae would grow on the material instead of somewhere else in the aquarium. The waterfall algae scrubber did grow lots of algae in the filter, and it removed lots of algae from aquariums: Over 1,000 people built their own waterfall algae scrubbers, and reported their results on various forums during a 4 year period; almost all of them wiped out their nuisance algae within 8 weeks, and many did so in 4 weeks. And on other forums that I never posted on, an estimated 10,000 people built their own waterfall algae scrubbers with similar results.

    A little over a year ago in April 2011, another idea came along: Instead of letting the water flow down a screen like a waterfall, how about you let the water flow up the screen using air bubbles? Why? Because as good as waterfall algae scrubbers are, they still need a place for the water to drain "down" to. This means that you need to have a sump below the aquarium, or you need to have the scrubber up above the aquarium. This is not easy, and is very difficult for a nano aquarium which usually has no sump below it, and no room above it. Also, the waterfall version requires it to be out of the water (in the air), which takes up extra space. The new "upflow" version, however, can be placed inside the aquarium, so that it takes up no extra space at all, and it needs no external plumbing or water pumps at all. Only air bubbles.

    The Upflow Algae Scrubber (UAS) provides the best growing conditions for algae in your tank: Air bubbles provide rapid turbulent flow; Strong lighting provides the light; and the nutrients that are already in your water provide the nitrate and phosphate. All that's needed is a place for the algae to attach to, and that is provided by the roughed-up plastic screen. Thus the algae start growing on the screen because the flow and lighting are stronger there than they are in the rest of your aquarium; nitrate and phosphate are consumed in the process. This causes algae to start disappearing from your aquarium and start re-appearing on the scrubber screen, so that you can throw the algae away every week or two.

    The most basic way to set up an Upflow Algae Scrubber, especially in small aquariums, is just to put some air bubbles beneath a vertical screen. If inside an aquarium, you just put a light on the outside of the glass, so that it shines inside to the screen. And if you want better performance (which means better filtering), just add a reflector to give the screen some light on both sides. The screen is best made with 7-mesh cross stitch plastic canvas that you get at sewing or craft stores, or online. Also, don't forget to rough up the screen with a sharp object like a hole saw; the screen should be so rough that the screen holes are almost filled in with all the little pieces of plastic that you roughed up.

    One thing to remember is that an Upflow Algae Scrubber (or any algae scrubber) will not cause more algae to grow in your aquarium. Instead, the algae will disappear from your aquarium, and will start to grow on the scrubber screen instead. You then just remove the screen and scrape the algae off. And here's a surprise: Watch out for your fish or snails eating your filter! There's nothing tastier than live green algae, so your fish or snails may keep your screen from getting very thick. The simple solution is to just put some mesh or netting around it.

    There are a couple of requirements that have been learned since August 2008 which will get you started quicker. The size of the Upflow Algae Scrubber that is needed is based on how much you feed, and not how much water you have, because the nutrients that cause algae to grow come from the food you feed. The following updated picture has size guidelines:

    (will be updated periodically)
    [​IMG]




    And the following updated picture has examples:

    (will be updated periodically)
    [​IMG]




    So build a UAS and post your pictures!
    .
    .
    .
     
    dayyantl550, Ebi Omer and Tremayn like this.
  2. AdS Guest




    to hide all adverts.
  3. Tremayn

    Tremayn

    Joined:
    21 Mar 2010
    Posts:
    5,226
    Likes Received:
    69
    Location:
    Lenasia
    Awesome cool man! Rep for you :)
     
  4. RiaanP

    RiaanP Moderator

    Joined:
    11 Aug 2008
    Posts:
    23,163
    Likes Received:
    1,232
    Location:
    Centurion
    Interesting idea. But what about the salt spray. Needs to be able to contain that bubbles in a catcher box of sorts. Only other problem is that the algae would like to grow on the inside of the glass where the light shines through. Reducing the light that falls on the scrubber. You need to keep the glass clean.
    But other than that, this should work as well.
     
  5. SantaMonica

    SantaMonica Thread Starter

    Joined:
    18 Sep 2008
    Posts:
    504
    Likes Received:
    23
    Location:
    Santa Monica, California, USA
    Well this is just the test version, so you could just lay something over the top. Future versions will have it taken care of.
     
  6. duanead

    duanead

    Joined:
    21 Mar 2011
    Posts:
    323
    Likes Received:
    7
    Location:
    Johannesburg
    Great stuff
     
  7. SantaMonica

    SantaMonica Thread Starter

    Joined:
    18 Sep 2008
    Posts:
    504
    Likes Received:
    23
    Location:
    Santa Monica, California, USA
    OK some growth pics...

    Floyd R Turbo on the GIRS site:
    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]



    Rkyrickstr on the TF site:
    [​IMG]

    [​IMG]



    Ruddybop on the MFK site:
    [​IMG]



    Fishuntbike on the scrubber site:
    [​IMG]

    [​IMG]

    [​IMG]



    And mine...
    [​IMG]
     
  8. Hermanus

    Hermanus

    Joined:
    16 Apr 2009
    Posts:
    679
    Likes Received:
    7
    Location:
    Harrismith
    Tagging
     
  9. Broder

    Broder Mudshark

    Joined:
    13 Sep 2007
    Posts:
    2,087
    Likes Received:
    32
    Location:
    East London
    This is a fantastic idea SM! Who conceptualised this idea? i'm goin to get to work right away building mine. Thanks for the idea.
     
  10. duanead

    duanead

    Joined:
    21 Mar 2011
    Posts:
    323
    Likes Received:
    7
    Location:
    Johannesburg
    Maybe a stupid question,but how do you get air bubbles to just come thru the bottom like that?
     
  11. SantaMonica

    SantaMonica Thread Starter

    Joined:
    18 Sep 2008
    Posts:
    504
    Likes Received:
    23
    Location:
    Santa Monica, California, USA
    Glad you like it. I came up with it last year.

    The bubble are all from airstones or bubble wands. Airstones are heavy, so they hold down the screen, and bubble wands come with weights to do the same.
     
  12. Renier

    Renier

    Joined:
    22 Aug 2007
    Posts:
    259
    Likes Received:
    3
    Would the light not create enough heat to crack my sump glass?
    better ask before I do something stupid
     
  13. Clownfish9906

    Clownfish9906

    Joined:
    5 Mar 2012
    Posts:
    688
    Likes Received:
    0
    Location:
    Midrand, Gauteng
    hey guys - just an idea - Why dont we try using an aircon filter net as it comes with the plastic grids and the nylon inserts???
     
  14. SantaMonica

    SantaMonica Thread Starter

    Joined:
    18 Sep 2008
    Posts:
    504
    Likes Received:
    23
    Location:
    Santa Monica, California, USA
    People who know glass has said the heating is not a concern... even with halides.

    Would like to see the aircon.
     
  15. brentv

    brentv

    Joined:
    4 Jun 2009
    Posts:
    2,212
    Likes Received:
    52
    Location:
    Cape Town
    Good idea bud;)
     
  16. SantaMonica

    SantaMonica Thread Starter

    Joined:
    18 Sep 2008
    Posts:
    504
    Likes Received:
    23
    Location:
    Santa Monica, California, USA
    The new Hang-On-Glass UAS with bubble remover:

    [​IMG]
     
  17. SantaMonica

    SantaMonica Thread Starter

    Joined:
    18 Sep 2008
    Posts:
    504
    Likes Received:
    23
    Location:
    Santa Monica, California, USA
    Everybody loves growth pictures:

    Day 1:
    [​IMG]

    Day 2:
    [​IMG]

    Day 3:
    [​IMG]

    Day 4:
    [​IMG]

    Day 5:
    [​IMG]

    Day 6:
    [​IMG]

    Day 7:
    [​IMG]

    Day 8:
    [​IMG]

    Day 9:
    [​IMG]

    7 Days of growth after first cleaning:
    [​IMG]

    Video of first cleaning after 9 days of growth from a new screen:



    Time to eat more TV dinners and save those trays :)
     
    Last edited by a moderator: 11 Apr 2016
  18. belindamotion

    belindamotion Google Master

    Joined:
    24 Jan 2011
    Posts:
    4,803
    Likes Received:
    134
    Location:
    Pinetown,South Africa(KZN)
    I never knew Algae can grow that fast...:thumbup:..love the UAS...
     
  19. Clownfish9906

    Clownfish9906

    Joined:
    5 Mar 2012
    Posts:
    688
    Likes Received:
    0
    Location:
    Midrand, Gauteng
    This is something I can really use due to space limiting factors!
     
  20. MistaOrange

    MistaOrange

    Joined:
    20 Jan 2010
    Posts:
    7,756
    Likes Received:
    94
    Location:
    Somewhere in Cape Town
    I like this idea will include it in my next build
     
  21. dallasg

    dallasg Moderator MASA Contributor

    Joined:
    14 Dec 2008
    Posts:
    16,771
    Likes Received:
    582
    Location:
    Sandton
    very cool, glad you shared
     
Recent Posts

Loading...
Similar Threads - Lowest cost easiest Forum Date
Lowest running temp on a marine system Water Parameters and Additives 5 Apr 2015
How Low Can It Go? - Lowest low of the year. The Sump 20 Aug 2009
Running cost? Beginner Discussions 20 Jul 2016
Stock @ cost - Seachem, red sea, Reeftek, ATI and more Sponsor Specials 24 May 2016
Cost effective way of dosing Mg, Kh & ca in liquid form Water Parameters and Additives 10 May 2016
Cost of Running a Chiller General Discussions and Advice 1 Feb 2016
Another Below cost Special for one day only!!!! Limited Stock!!!! Sponsor Specials 21 Dec 2015