LED Driver help

Joined
12 Jul 2010
Posts
5,148
Reaction score
149
Location
Wilgeheuwel, JHB
Hi guys

I need some guidance

I have a Mean well ELN-60-48p dimmable driver and trying to connect 6 x10w led's to it but i cant get it to work. I dont have a dimmer connected, is this required for it to switch on?

When i use a china 60w driver it comes on, so no issue with the wiring of the leds.

Appreciate any comments
 
Have you tested the driver for continuity? It has a 1,3Amp current capacity, maybe check the current on the led. Otherwise connect 1 led and check if it works. The driver can run multiple leds, not sure if its for 3w or 10w. Use 1 led, then test with 2 and then 3 etc.
 
Last edited:
You do need to provide a 1 - 10V signal on the dimmer wires. As you have the -48P version, this needs to be a PWM signal. If you PM me your email address I'll email you a pdf document that explains the wiring.
 
Back
Top Bottom