How to Build a Nitra-Guard BIO-Cubes Bomb

Discussion in 'Jungle Aquatics' started by bryan, 18 Jul 2012.

  1. JungleAquatics

    JungleAquatics Sponsor

    Joined:
    6 May 2007
    Posts:
    1,681
    Likes Received:
    37
    Location:
    BROADACRES SHOPPING CENTRE, Fourways, Sandton, JHB
    ORCA Nitra-Guard BIO-Cubes Bomb

    After soaking Nitra-Guard BIO-Cubes for 24 hours in normal tap water, drain cubes of water. Prepare a 40cm airline with airstone and valve as shown in picture below.

    [​IMG]

    Put the airstone into the bag.

    [​IMG]

    Start adding the Nitra-Guard BIO-Cubes into the bag so that the air stone stays in the middle of the bag.

    [​IMG]

    [​IMG]

    Wind the Filter bag draw strings tightly around the airline tubing to make sure everything is secure.

    [​IMG]

    [​IMG]
     
  2. Guest




  3. OP
    JungleAquatics

    JungleAquatics Sponsor

    Joined:
    6 May 2007
    Posts:
    1,681
    Likes Received:
    37
    Location:
    BROADACRES SHOPPING CENTRE, Fourways, Sandton, JHB
    Nitra-Guard BIO-Cubes bomb is complete and ready to be attached to an air pump and placed into the filter. Turn the air flow as high as possible to get as much oxygen and water flow through the cubes.

    [​IMG]

    [​IMG]

    * Thanks Mark from ORCA for this...
     
  4. OP
    JungleAquatics

    JungleAquatics Sponsor

    Joined:
    6 May 2007
    Posts:
    1,681
    Likes Received:
    37
    Location:
    BROADACRES SHOPPING CENTRE, Fourways, Sandton, JHB

Recent Posts

Loading...
Similar Threads - Build Nitra Guard Forum Date
DIY nitra-guard bio-cubes reactor build Chemical Filtration / Low Nutrient Systems - LNS 18 Feb 2013
New build General Discussions and Advice 18 Jul 2017
Ally''s 2m Build Large Tanks 4 Jul 2017
LED light builds.... Lighting 31 May 2017
Tank Builders PE General Discussions and Advice 8 May 2017
Planning to build bigger tank Anything DIY Related 28 Apr 2017
Tank builder needed (Edenvale/East Rand) General Discussions and Advice 6 Apr 2017