Hey Guy's my name is Anthony and I would like to share my tank with you :dft010:
This system has been running for just over a year now. In fact in turned 1 last week. The system design was a collaberation between myself and my good reefkeeping Buddy Cerven. By this stage the SPS bug had bitten me badly, so this system was designed around that. I wanted lots of flow, big lighting and an effecient means for nutrient removal. Skimming was also high on the priority list.
The tank was constructed from 10mm glass on a floating base. Dimesions are 200cm long x 80cm wide by 75cm deep. Sump is 120cm x 60cm x 50cm.
Equipment as follows:
Lighting:
3 x 250W MH powered by Icecap Electronic Ballasts
2 x 54w T5's
2 x 39W T5's
1 x 140W VHO actinic
Water movement
2 x 6100 Streams
2 x 6000 Streams
1 x Nano stream
Ocean Runner 6500 return pump
Skimmers
Reef Octopus DNW 200
Deltec APF 600
Ca Reactor
Reef Octopus run with a Tunze CO2 controller
Chilling
Haliea / Aqua Medic
That's most of the major stuff.
This is the result:
Left Side:
This system has been running for just over a year now. In fact in turned 1 last week. The system design was a collaberation between myself and my good reefkeeping Buddy Cerven. By this stage the SPS bug had bitten me badly, so this system was designed around that. I wanted lots of flow, big lighting and an effecient means for nutrient removal. Skimming was also high on the priority list.
The tank was constructed from 10mm glass on a floating base. Dimesions are 200cm long x 80cm wide by 75cm deep. Sump is 120cm x 60cm x 50cm.
Equipment as follows:
Lighting:
3 x 250W MH powered by Icecap Electronic Ballasts
2 x 54w T5's
2 x 39W T5's
1 x 140W VHO actinic
Water movement
2 x 6100 Streams
2 x 6000 Streams
1 x Nano stream
Ocean Runner 6500 return pump
Skimmers
Reef Octopus DNW 200
Deltec APF 600
Ca Reactor
Reef Octopus run with a Tunze CO2 controller
Chilling
Haliea / Aqua Medic
That's most of the major stuff.
This is the result:
Left Side:
