Diy led options and supliers


Joined
24 Oct 2019
Posts
6
Reaction score
1
I bought a unpronounceable(some Asian supplier) 100L nano cube, due to loadshedding the power supply burned this was during the hard lockdown so options were limited, so ended up just buying an adjustable transformer but could not get an exact match to volt to amp ens. So currently it's set to a guestamation, I since went to Lfs but the option are either out of my budget or not going to fit the hood(removing the hood is not an option as I do have a jumper in tank), tried searching the threads but diy and led cant be search it just say its to common or too short what I'm looking for is a diy option I can build myself to fit my current hood so if anyone has had success with this some tips would be nice and also were to source the right LEDs controllers ens.
 
Joined
28 Apr 2015
Posts
666
Reaction score
96
Location
East Rand
Depending on size of the tank my only advice would be go 10w led chip strait into a cctv psu lower the voltage to 10v. @Royden Church gabe me this advice many years ago. No drivers just basic setup and it works.
 
Top Bottom