Okay, so I am back at making a new set of my LED Lights, this time based on ZETLIGHT ZT6600.
I decided to make the whole assembly from aliminium firstly for cost,secondly heat dissipation and lastly can powerdcoat any colour.
Each unit will be driven by a 24v 20a psu. I can either fit the Zetlight controller or tc420/1 controller. The centre led is 4 x 15000k 10w chip and all other leds are same as the zetlight unit.
Some photos are testing phase of leds and some of laser cut and cnc bent still have plastic film on.
Included in photos is what a zetlight std looks like to compare. This was a unit I fixed within 2 hrs for a lfs.
Some photo of the parts and tests:
I decided to make the whole assembly from aliminium firstly for cost,secondly heat dissipation and lastly can powerdcoat any colour.
Each unit will be driven by a 24v 20a psu. I can either fit the Zetlight controller or tc420/1 controller. The centre led is 4 x 15000k 10w chip and all other leds are same as the zetlight unit.
Some photos are testing phase of leds and some of laser cut and cnc bent still have plastic film on.
Included in photos is what a zetlight std looks like to compare. This was a unit I fixed within 2 hrs for a lfs.
Some photo of the parts and tests: