Christo's 3.0m Upgrade

Definitely going to be something to look at. Quite excited to see the
end product.
 
Christo said:
Finished the Dispaly on Friday...

IMG_2331.JPG


IMG_2333.JPG
Click to expand...

@Christo what are the holes at the bottom for...draining?
 
Murphy said:
@Christo what are the holes at the bottom for...draining?
Click to expand...

Hi @Murphy

The Bottom Holes are the Inlets/Returns. The Return Line first moves up along the tank Just above the waterline then back down to the bottom holes, then theres a Small 8mm line at the top before the return moves back down, this 8mm line is tied into the Back of the overflow, if the Pump trips air is sucked thru the 8mm line breaking the Syphon and preventing the Display to loos Level.

Hope that makes sense......
 
Christo said:
Hi @Murphy

The Bottom Holes are the Inlets/Returns. The Return Line first moves up along the tank Just above the waterline then back down to the bottom holes, then theres a Small 8mm line at the top before the return moves back down, this 8mm line is tied into the Back of the overflow, if the Pump trips air is sucked thru the 8mm line breaking the Syphon and preventing the Display to loos Level.

Hope that makes sense......
Click to expand...

@Christo Thanks that is clever! I can sort of picture the setup. When you done with the assembly please take a pic. Awesome woodwork there!!
 
You must log in or register to reply here.
Back
Top Bottom