Anybody using a Jebao DC 1200?

[Peter12]

Hi everybody, is anybody running a Jebao DC 1200 pump? I am looking for a replacement return pump for my nano tank. unfortunately I am plagued by a very small return chamber (70mm x 70mm) I am hoping somebody could measure the distance in the attached image for me before I pull the trigger (I will need to modify the pump by cutting down the intake pipe). Thanks in advance!

 

[Kevesen]

Hi Peter if you looking for a replacement pump for a red sea max nano this will work, i have 1 on my tank, you just need to cut the inlet part out

 

[Peter12]

Thanks for the feedback, its actually for a tank I built myself.. (dumb me for making such a small return chamber) but I will see if I can find the dimensions for a RSM nano for comparison

 

[2una]

Looks like 72mm to my eye - DC1200 but the blue one - locally they haven't stocked these smaller pumps for a long time. Total length 92mm not the 100mm in your pic.

 

[Rico]

Try these guys, they might have stcok.
Jebao 24V Sinewave DC water pump - Aquaponics Africa

 

[Peter12]

Looks like 72mm to my eye - DC1200 but the blue one - locally they haven't stocked these smaller pumps for a long time. Total length 92mm not the 100mm in your pic.

Thanks for the info @2una

 

[Peter12]

So.... unfotunately the Jebao won't fit even with modification. I did manage to find a Waterhouse 600lph that will tide me over in the meantime. Open to any suggestions or bright ideas on a better option.

 

[gaboon]

Are those Waterhouse pumps ok for marine? If your tank is still in the early stages I would reconfigure the sump. The tank will be fine for a couple days

 

[Whoknows]

Can't you plumb the pump externally?

 

[Peter12]

They say on the packaging suitable for saltwater aquarium... but I noticed it has a stainless steel impellar shaft not ceramic... so definately not a long term solution.

 

[Peter12]

Can't you plumb the pump externally?

I could, kind of defeats the point of an AIO though...

 

[Peter12]

I have considered modifying the sump... but eish it will be a serious process as everything is bonded acrylic

 

[Whoknows]

I could, kind of defeats the point of an AIO though...

Good point. Must be something that will fit.

 

[anonymone]

Only way might be to move the one baffle over to suite the return and make the middle section smaller

 

[Royden Church]

Check this one out:

Takealot

 

[JpPaulKruger]

Compact 12v DC 800L/hr 5m Head Submersible Water Pump available to buy online at @TAKEALOT We offer fast, reliable delivery to your door.
https://www.takealot.com/compact-12v-dc-800l-hr-5m-head-submersible-water-pump/PLID61065581

 

[Peter12]

@JpPaulKruger that might just be the ticket! shot!

 

[2una]

Saw locally this one the other day that looks like it would fit + less the metal screws, 72H x 38W x 62D

EHEIM compactON 300

Compact, powerful and silent EHEIM compactON is the compact and yet powerful aquarium pump. Available in nine sizes, for flow rates from 170 to…

eheim.com

 

[Peter12]

Thanks @2una, I will check it out!

 

[Peter12]

Can't you plumb the pump externally?

Looks like I will probably end up going this route... It will also be an oportunity to implement drip free "easy as pie" water changes with some smart plumbing.