Any Profilux Fundis out there...help needed

Discussion in 'Test Kits, Controllers, Reactors and Dosers' started by flappy, 31 Dec 2013.

  1. flappy

    flappy

    Joined:
    18 Jul 2007
    Posts:
    1,273
    Likes Received:
    52
    Location:
    Cape Town
    Hi

    I am attempting to program the Profilux 3 together with a level sensor.
    I have a sensor installed at the top water level of the main display and need to switch off the main return pump should a predetermined water level be reached in the main display to prevent any potential flooding.
    I have installed the sensor in the display tank and linked it to a power socket however when I set this up it only allows me to run my main pump for a maximum of 8 hours as per the settings when the sensor is linked to the Profilux.
    I need this to run the main pump 24/7 and only cut off in the event of the sensor picking up water due to the water level rising.

    Please advise how I set this up.
     
  2. AdS Guest




    to hide all adverts.
  3. Riaanvw

    Riaanvw

    Joined:
    12 Sep 2013
    Posts:
    38
    Likes Received:
    0
    Location:
    Johannesburg
    bump

    I also want to know.


    Happy new year
     
  4. carlosdeandrade

    carlosdeandrade

    Joined:
    24 Dec 2010
    Posts:
    8,230
    Likes Received:
    228
    Location:
    North Riding, Jozi
    This is what the manual says in terms of maximum on time to the return pump
     
  5. carlosdeandrade

    carlosdeandrade

    Joined:
    24 Dec 2010
    Posts:
    8,230
    Likes Received:
    228
    Location:
    North Riding, Jozi
    What I understand is that if you set the time to zero and then no deactivation occurs. Do you have the manual? I could send it.
     
    Last edited: 31 Dec 2013
  6. carlosdeandrade

    carlosdeandrade

    Joined:
    24 Dec 2010
    Posts:
    8,230
    Likes Received:
    228
    Location:
    North Riding, Jozi
    Here is the manual, just in case you don't have it. good luck.
     

    Attached Files:

  7. DeanT

    DeanT Dean

    Joined:
    16 Jun 2009
    Posts:
    1,850
    Likes Received:
    25
    Location:
    Claremont, Cape Town
    Best to post request on the profilux support forum

    They seem to be the best when it come to the more complex stuff
     
  8. carlosdeandrade

    carlosdeandrade

    Joined:
    24 Dec 2010
    Posts:
    8,230
    Likes Received:
    228
    Location:
    North Riding, Jozi
  9. DeanT

    DeanT Dean

    Joined:
    16 Jun 2009
    Posts:
    1,850
    Likes Received:
    25
    Location:
    Claremont, Cape Town
    The problem hasn't been solved and instead of getting half answers the support forum is the best

    Also the manual and programming guide isn't the easiest to work with
    The support forum helped me with some advanced stuff and at least you know you getting the right answer
     
  10. carlosdeandrade

    carlosdeandrade

    Joined:
    24 Dec 2010
    Posts:
    8,230
    Likes Received:
    228
    Location:
    North Riding, Jozi
    So what you saying is that I sm wrong? Have you read the manual? Obviously not. I found it quite easy to understand. I found the forums quite complex.
     
    Last edited: 1 Jan 2014
  11. DeanT

    DeanT Dean

    Joined:
    16 Jun 2009
    Posts:
    1,850
    Likes Received:
    25
    Location:
    Claremont, Cape Town
    Well I guess we have difference in opinion

    Complex issues in the manual are not explained very well
    I found support forum much better
     
  12. carlosdeandrade

    carlosdeandrade

    Joined:
    24 Dec 2010
    Posts:
    8,230
    Likes Received:
    228
    Location:
    North Riding, Jozi
    Ok, I've searched the forums on ghl sight. Not much help. Can you point us in the right direction as I too want to know.
     
    Last edited: 5 Jan 2014
  13. DeanT

    DeanT Dean

    Joined:
    16 Jun 2009
    Posts:
    1,850
    Likes Received:
    25
    Location:
    Claremont, Cape Town
    @carlosdeandrade
    If you don't manage to find anything, don't stress , as there is a lot of cr&p

    Register and start a thread , you will get a response from a technical advisor (might take a few days

    It Is a bit of a pita, but they will give you the right answer

    Good luck
     
    Last edited by a moderator: 26 Nov 2015
Recent Posts

Loading...
Similar Threads - Profilux Fundis help Forum Date
[wtd] Profilux optical sensor Wanted 22 Oct 2016
ph profilux General Discussions and Advice 21 Oct 2016
[wtd] Reef Angel or Profilux Wanted 4 Aug 2016
[wtd] Profilux 3.1 or Reef Angel Wanted 5 Apr 2016
[wtd] Profilux dosing unit wanted Wanted 18 Mar 2016
Profilux Skills Test Kits, Controllers, Reactors and Dosers 24 Feb 2016
[wtd] Help with Profilux Wanted 28 Jan 2016