A kwik Q

Discussion in 'Beginner Discussions' started by Wetty, 28 Jul 2008.

  1. Wetty

    Wetty Rockford Fosgate Fish

    Joined:
    17 Jul 2008
    Posts:
    511
    Likes Received:
    0
    Location:
    Alberton ,Johannesburg
    A kwik stupid Q. Can u have a tank drilled for the overflow after its been built? Or must it be drilled before building it?
     
  2. AdS Guest




    to hide all adverts.
  3. Shaun

    Shaun Retired Moderator

    Joined:
    29 Aug 2007
    Posts:
    5,274
    Likes Received:
    15
    Location:
    KZN
    You can drill it after, just not with water in. (though I would add the water bit in, just in case you ask that. :whistling:)
     
  4. Rory

    Rory Admin MASA Contributor

    Joined:
    5 May 2007
    Posts:
    4,850
    Likes Received:
    34
    Location:
    JHB
    You can drill it with water in if you know what you're doing and you're really brave... Can drill it after it's been built but there's always a chance of a piece of glass cracking when you drill it, and it's easier to replace a piece than to take a cracked piece off and rebuild the one side.
     
  5. Wetty

    Wetty Thread Starter Rockford Fosgate Fish

    Joined:
    17 Jul 2008
    Posts:
    511
    Likes Received:
    0
    Location:
    Alberton ,Johannesburg
    Theres a place in benoni called Helenic Glass Works...and they specialize in glass. Im sure they know wot they doing....fanx alot guys
     
Recent Posts