Input on tank build

Joined
23 Feb 2010
Posts
4,289
Reaction score
290
Location
Cape Town
Hi guys

So about 1year ago,my initial plans for a FOWL 2m tank had to be canned.

Now I decided to go for something abit smaller..last night my friend delivered the glass for a new tank.going to be 1,2m X 60cm wide X 60cm high in 12mm thick glass..the glass worked out to R700 with top and bottom bracing.

I already hav two quad 39watt t5 units which I want to use on tank..I'm either gna keep a nice fish collection or go for softies but concentrating on zoas..I also have a powerlab skimmer with an askol pump..skimmer rated for 1000litres.

I have two questions...

1. As the glass is 12mm thick..is there any chance the tank can be rimless?or does the 60cm height mean I mst use bracing even if glass is 12mm thick.

2. Does any1 know where I can get me black silicone in cape town?if so,pls post the brand details and code

Any input is appreciated.
 
4age,
What is your water height going to be in 60cm high glass (55cm??)
Den Braven make a black aqua sillicone!
 
A friend organised glass for me..I will probably have waterlevel at 55cm height..someone pls send me details for den braven supplier in cape town
 
Like I said guys..a friend organised it..if I knew a supplier who sells for that cheap I would build all my tanks out of 12mm glass.lol.

Also want to know if its better to have a wooden board between the tank and stand?or thick polystyrene between glass and stand
 
R700 for glass is cheap, the cheapest I got was for 10mm same sizes for R1300.00:whistling: Anyone know where I can get glass cheaper?


Locally they charge -+ R700 for a square meter 10mm.

If i could get the same price for 12mm for 120x60x60 with bracing......id drive down to Cape Town and pick up the glass myself. And the i will still safe loads!!
 
Lol..true hey..there was a supplier near my place who was also cheap..ANO glass..I paid R450 for a 10mm piece which was 2m x 65cm..was about 1yr ago..not sure wat it wud b now

Guys..now I need a stand..any1 have a stand for a 1,2 by 60cm tank pls pls pls?lol
 
Like I said guys..a friend organised it..if I knew a supplier who sells for that cheap I would build all my tanks out of 12mm glass.lol.

Also want to know if its better to have a wooden board between the tank and stand?or thick polystyrene between glass and stand

I always place a board on metal, then poly on board.
 
Well guys,I need to get me an uplift pump for the tank.I can get an eheim 1060 pump for the tank..I want to get a 1,2m sump..will this pump be enough to run my set up..gna have a dsb on it..gna run my skimmer off my overflow
 
eheim 1060 pump
What is that pumps rating?
What is the width of your sump (front to back)?
Do you want to go with a DSB?
 
Hi riaan..I think the pump does between 2000-3000lph..I want a dsb..sump shud be a standard 1,2m tank..so will be 45cm wide..was thinkn of making dsb area 50cm long.
 
Pump might be a bit too small. You should aim at about 3000L/h delivered at your tank rim. Taking head height loss as well as bends into account.

Unless you have some reactors that also pull water from last chamber and deliver back to first chamber. Or just an extra 1000L/h pump doing that.

For now, use that pump with extra smaller pump as described. See in your setup if you have excess detritus settlement on the sand. So you can experiment and find out what is your ideal pump.
 
Back
Top Bottom