CT Galvanising

Joined
16 Oct 2008
Posts
5,696
Reaction score
70
Location
Hermanus
For all the CT guys out there, who is the best (and most reliable in CT terms) to get galvanising done at. The reason for my asking is I used oakes (dont want to mention names in case of a lawsuit), and from start to fisnish galvanising a stand became a f-up.

Firstly getting the order wrong from shotblast & Galv to shotblast only resulting in leadtime going from 5 - 7 days to 10 days. Then when finally collecting the stand, it was done like : shit : (example...the hang wires for dipping was galvanised onto the stand, not removed & touched up etc). Happily they were willing to re do the Galv, but upon phoning earlier I found out it will only go on the last run (as it is a re-work) and that happens just before closing time !!!! So now I can only collect tomorrow

So for future reference I would like to know who uses who so to speak
 
Chill out dude, look at the mountain and take a deep breath.
then throw your toys....
 
Back
Top Bottom