The front and side panels of the cabinet cut and made from Solid Kiaat!
Christo's 1.8m
- Thread starter Christo
- Start date
And then everything fited to the stand to see what it looks like! Still have to glue and clamp the wood and finish it of with Woodoc!
And of course the Polystyrene for the top! Still have to make 4 Panel doors for the front of the cabinet!
That's it for now!
Will be getting the tank by next week!
Cheers!
Will be getting the tank by next week!
Cheers!
LCornelius
Moderator
Looking great Christo!
Can't wait to see this tank up and running!
Can't wait to see this tank up and running!
LCornelius
Moderator
Just went through your thread again, but no mention on what you plan to keep?
I personally would have run 4 x Midday T5's
I personally would have run 4 x Midday T5's
Hi! Thanx for the coments! Planing on running a Mixed reef! Bit of everything! Any specific reason on why you would run 4 instead of 2 middays?
LCornelius
Moderator
It would give you more options in keeping SPS and nennies.
You can always add more later if you see that 2 don't cut it!
At least you are using the best tubes out there (my opinion)
LCornelius
Moderator
On my 650 x 650 cube I'm running 2 middays and might add 2 more in the future.
Right now I only have softies and they are super happy, but going to add one or two sps frags and a nennie later.
Right now I only have softies and they are super happy, but going to add one or two sps frags and a nennie later.
It would give you more options in keeping SPS and nennies.
You can always add more later if you see that 2 don't cut it!
At least you are using the best tubes out there (my opinion)
Thanx! Will def. Keep that I mind if they struggle!
It would give you more options in keeping SPS and nennies.
You can always add more later if you see that 2 don't cut it!
At least you are using the best tubes out there (my opinion)
O Ye! Forgot! Regarding the tubes, I think so toooo!
LCornelius
Moderator
O Ye! Forgot! Regarding the tubes, I think so toooo!
Jip, price is steep, but you get results!
looking good dude nice to see progress
keep pics coming
keep pics coming
Can you remove the cabinet to be able to slide your sump in? Or going to built the sump in place?
just checking
Hi Riaan! The cabinet is actualy loose from the steel frame! Wil be bolted to the steel frame once the sump is in and if needed unbolted to remove sump!
This will work much betterNano Reflective Film
Looks good! I see the size is 63cm x 100cm, do you know if they sell in larger sizes?
Dont know, but you can email them and ask... think this will work 100% better...
The woodwork, do you do it yourself? Looking good
Dont know, but you can email them and ask... think this will work 100% better...
The woodwork, do you do it yourself? Looking good
Thanx! Will gooi them a mail! Yes! I did the Woodwork!
Gr8t stuff, I`m busy with my 1500 x 800 x 550, you dont mind doing the woodwork for me?