MASA Admin
Moderator
- Joined
- 8 May 2007
- Posts
- 14,097
- Reaction score
- 218
Orca Labs Nitra-Guard Bio-Cubes are an interesting take on solid carbon dosing. A lot of our readers are likely familiar with biopellets and their assorted variations, but these appear to be completely different. Nitra-Guard Bio-Cubes* were originally invented in South Africa, and come in two variations; the Nitra-Guard Bio-cubes and the Nitra-Guard Bio-Cubes Titanium. The first of the two is the most similar to conventional bio-pellets, but is claimed to contain 400% more usable carbohydrates and is suppose to work much quicker (days vs. weeks). The Nitra-Guard Bio-Cubes Titanium is also a carbon source but it is a (the first)* Redfield ratio resistant carbon source, meaning that if your main problem is battling Nitrates with no Phosphates in the system the Bio-Cubes Titanium will still function properly. Like the regular Bio-Cubes the Titanium variation is also claimed to contain 400% more usable carbohydrates, and is likewise suppose to start working much faster.
For those that are not familiar with the Redfield equation, or its application to carbon dosing in aquariums, might be a bit confused about the exact difference between the regular* Nitra-Guard Bio-cubes and the Nitra-Guard Bio-cubes Titanium. The Redfield equation is the balance between carbon, nitrogen and phosphate in plankton and bacteria/yeast. The ratio is 106:16:1 with very small variations among different bacteria and plankton. Considering that plankton and marine bacteria get their carbon, nitrogen, and phosphate from the water column, the lack of one of these nutrients will stunt or stop growth. So if there is no Phosphate in the system, bacteria will not grow propely and absorb the nitrogen like intended. It might seem counter intuitive, but for nitrogen export there thus needs to be a small amount of Phosphate. In conventional carbon sources that is, the Nitra-Guard Bio-cubes Titanium somehow works even without the right balance of Phosphates in the system.
Another cool thing about these cube-pellets beside their much higher amount of carbohydrates, is the way these Bio-Cubes are used. The Bio-Cubes do not require a reactor, and users are actually discouraged from using reactors unless they install a venturi for air intake. Instead these Nitra-Guard Bio-Cubes can be used by creating what the creators call a “bomb”, which is in essence just a media bag with an airstone and the Bio-Cubes. Each Nitra-Guard container comes with its own media bag, so you’ll just have to add the airstone and you can simply drop the bag in your sump. Top off the Bio-Cubes as needed every couple months, and you’re good to go (Orca Lab’s recommends four, but the exactly number obviously depends on your system).
What the exact pricing will be like is currently unknown since Nitra-Guard is still looking for a US distributor, but it seems in several other countries 500ml sells in the $55-70 dollar range so we expect the products to be priced around that pricepoint. Orca Labs recommends 1-4ml per liter (3.78 ml-15ml per gallon) so the product might seem a little bit expensive, but the products lasts for months until it needs to be topped-off rather than replaced, and doesn’t require a reactor. We should get our hands on some of the Bio-cubes in the next couple of months so stay tuned for a full run down.
Readers also viewed:
- Krzysztof Tryc’s reef tank system with BioPellets
- Lawrence Chan’s SPS reef from Hong Kong
- Reef aquarium from New Zealand is ‘top down’ picturesque
- Rx-Z zeolith reactor from Vertex Aquaristik is a Rolls-Royce for Zeovit systems
- Reef Octopus hang on Zeovit reactor
- Minimini’s ZEOvit tank in Japan
- Precision Marine goes crazy with biopellets with new modular system, double-decker unit gets 5 liters in action
- XL Biopellets are jumbo ‘bio-bones’ that don’t need to be fluidized
Click here to read the article...
Still want to get hold of some titanium, when is coming?
